Monday, January 25, 2016

Das Aluminium Spinnrad



Over the last two years of collecting and restoring spinning wheels, I've developed a particular affection for wheels that have been languishing in storage.  I've also got a soft spot for wheels that use metal in unusual places.  So this wheel, which appeared last month on eBay in Germany, hit all my buttons.  The seller told me he found it in his grandmother's house and estimated she had worked with it 60 years ago.



It was slathered with a layer of paint in an unfortunate shade of brown, and the metal parts were pretty dark, pitted in a few spots and rusted in others due to corrosion.  The wheel was packed in a box that was too small, and a hit on the back leg cracked the table while it was in transit.  My heart sank when I first unpacked it, thinking it was too far gone to rehabilitate.

Over the course of the following weekend, I started to clean up the metal, using a scrub pad and a solution of vinegar and cream of tartar on the aluminum parts.  Generous use of sewing machine oil and the wire brush attachment on my Dremel did the rest to get the metal flyer assembly spiffed up.  Stripping off the paint revealed lovely wood which came back to life with a coat of Danish oil and a follow-up of Howard's Feed and Wax.




The flyer is quite dainty with a tiny orifice.  It sits in bearings made of wood within the aluminum maidens.  Tiny wire hooks slide in channels on each arm of the flyer.

The drive band is tensioned with a screw post that raises the MOA up and down.

I have seen photos of four others of these wheels on Pinterest.  They all source back to eBay Germany except one which traces back to eBay France.  One Pinterest description states the wheel is from the 1950's, another says 1948.



After the first big effort to get this sturdy little wheel cleaned up and running, it came back into spinning condition very easily.  It treadles smoothly and is practically silent.  The size of the orifice suggests that it was made to spin very fine, and I was interested to see that one of the photos from Pinterest shows a sibling wheel set up to spin in triple drive, where the drive band makes three loops from the drive wheel to the flyer assembly.  I'm running it in double drive right now, which is far more common, but I'm looking forward to exploring the capabilities of this sweet little spinner!

8 comments:

  1. You should post some before pictures so we can REALLY appreciate what you were up against! --Ann Gibson

    ReplyDelete
  2. You restaured it perfectly and this will be the ideal for restauring mine, which looks similar to yours! Thank you for posting!

    ReplyDelete
  3. I would be interested in seeing a triple drive setup.

    ReplyDelete
    Replies
    1. I tried it and it was an utter failure for me, but here is the Pinterest post where I saw a similar wheel set up in triple drive:
      https://www.pinterest.com/pin/455356212304576779/

      Delete
  4. I’m looking for the handout mentioned in the YouTube video lecture about spinning wheel rescue… I’m working on my first rescue - it hits squarely on my passions for spinning, toolmaking, rescuing vintage items that can be made whole (mostly electronics until recently), figuring out how things work, fixing machines…

    Any suggestions on information sources for reference would be invaluable.

    ReplyDelete
    Replies
    1. Sent you an email but not sure if it went through. If you’re on Ravelry, find me there under the ravatar hypercycloid and I can help!

      Delete
    2. Sent you an email but not sure if it went through. If you’re on Ravelry, find me there under the ravatar hypercycloid and I can help!

      Delete