J. Owlet

This is the first antique wheel I ever bought.  Like many spinners with an undeveloped eye for antique wheels, I grabbed it without fully comprehending its mechanical problems, and for months felt resentment towards it simply because it needed more rehabilitation than I could provide.  A year's experience with other wheels enabled me to come back to the table with a better attitude and some new ideas.

Original flyer on the left, replacement flyer on the right

The biggest problem, one which I willfully overlooked, was a flyer that was really too beat-up to be fixed.  I loved the old repairs, and knew that a break at the neck of the flyer arms could probably be professionally repaired with the original materials, but I failed to notice that the metal at the orifice was so worn that it deformed easily with very little pressure.  At one point it was crushed in, but came back into round solely from centrifugal force when I spun the flyer as a test - that's how thin and pliable the steel was!

The wheel started to look like it was salvageable when I was lucky enough to find a replacement flyer in a box of parts at an antique store in Quebec.  I did some tune-ups over the winter and got almost all the clunks and rattles out of the wheel, but discovered another problem: the crank of the drive wheel has the tiniest bit of play at the hub.  This problem would get worse over time, until the crank hole was stripped and would no longer turn the drive wheel.  Nails of various sizes were driven into the hub at this spot, indicating that the problem had been present in the past, but at this point the crank seating needs professional repair.

When I first brought the wheel home, I was especially tickled to see that it was marked, with JO stamped on the butt end of the table.  Jeremie Ouellet was wheel maker who lived in Quebec from 1845-1903.  His family continued to make wheels into the 1970's, when Guy Ouellet, Jeremie's great-grandson, was stamping his wheels "Famille Ouellet depuis 1796".





When I think beyond the cries for attention, I am pleased with this wheel.  Like Big Louie, it is a Canadian Production Wheel - though with a 26.5" drive wheel, it's one of the smallest sizes that can still be considered a CPW.  Tilt-tensioning here is achieved with a U-bolt holding the mother-of-all to the table, and a handle to adjust the angle.  The table, uprights, and treadle - all the wood parts, really - have beautiful grain and patina.  Coming back to the JO after a year of experience with other wheels represents a neat full-circle for me, and once its drive wheel hub is properly repaired, I look forward to learning how this wheel was really meant to spin.

The Holyoke Spinning Machine

So much to say about this one.  In the words of a fellow collector, this rare Canadian spinning wheel is a "mythic beast".  When I first started developing an interest in antique spinners, it caught my eye because of its elegance and the use of cast iron, and I eagerly scoured the internet to learn all I could about the unusual design.  I learned that five of them were known to exist, four of which were in museums and one in private collection.  The one closest to me was at the American Textile History Museum.  I dreamed of getting the chance to see it in person and take measurements, so when I learned some metalsmithing I could make something like it for myself.

Imagine my thrill when a sixth turned up at an antique store in Quebec.  A good soul posted about it on Ravelry, I called the store right after they opened the next day, and gave them a credit card number over the phone.  I watched the "sold" banner appear across its photo on their website, and waited impatiently for the chance to drive the fourteen-hour round trip to pick it up.

In October, I brought the mythic beast home.  The first time I tested it out, the treadle bar snapped at a spot that had clearly been repaired in the past.  A bolt had stripped threads that made it difficult to tighten the frame properly, the wheel rubbed against an upright, and the whole thing was covered with a layer of thick latex paint.  Under the paint, though, there were impressions on the wood flyer indicating that my baby had a solid history as a working wheel.

I had the treadle repaired professionally.  The spot at the break was reinforced with steel rod, then wood was added to replace what had broken away.  Stripping the flyer and whorl revealed past repairs, all of which looked to be solid and professionally done.  I added some leather and a few metal O rings in spots to tighten and cushion things up.  The last little rattles and wiggles were worked out in December, and I had a wheel that was virtually silent, steady, and smooth.  The metal drive wheel weighs ten pounds and has lovely momentum.

There are two patents associated with this wheel design.  The first was filed in Holyoke, Massachusetts by two Canadians, Vigeant and Demarais, in 1880.   Though it is clear from the drawings that their design incorporated the unusual wheel shape and materials, their patent was actually about some sort of wedge at the hub that accelerated the wheel's momentum.  (No surviving examples of this design feature are known.)  A Canadian patent in 1883 by Beauchemin specifically develops a way to add a zinc rim to the drive wheel to improve production efficiency.  This second patent refers to the wheel design as the "Holyoke Spinning Machine".

Like other Canadian wheels of this era, the Holyoke wheel has tilt-tensioning.  A thumbscrew forces the flyer assembly away from the drive wheel, tightening the drive band.  In each of the six wheels, there are design variations, including small changes in the tensioning system.  Variations also appear in the treadle design (wood treadle, "bear claw" iron treadle like mine, or traditional iron treadle).  Some of the surviving wheels have a spring-loaded MOA for holding and releasing the flyer, and at least one wheel has a flyer made of metal.


Restoring my Holyoke wheel has been an interesting journey and I appreciate the historical significance of owning a rare wheel like this one, but at the end of the day, what delights me most about it is that it is a terrific spinning machine - my favorite at the moment.  Jeekeehoo, a Ravelry member who was following my progress restoring the wheel, made a comment which perfectly expresses my feelings about the project:

It’s great that the other examples of this wheel are being preserved in museums, but there’s something so lovely, so right, about this one being SPUN on, being loved and cared for by someone who really understands that seeing it function is part of what makes it beautiful, part of what makes it worth preserving.

Cricket

Cricket is built in a typical Swiss lateral frame design, with the treadle alongside the frame rather than between the supports, and the flyer and bobbin perpendicular to the treadle.  She was found in a Bavarian farmhouse and probably dates back to the early 1900's.

She caught my eye because of her beautiful turned features, especially the captive rings on the mother-of-all horizontals and the wheel hub.  (The large one on the wheel hub undulates back and forth as the drive wheel turns - just mesmerizing.)  Captive rings are created while the main piece is turned, by undermining wood from the piece being carved.  Spinning wheels with a lot of them showcase the skill of the woodworker.

This wheel was a birthday present to myself.  I found her on German eBay and watched the seconds count down with baited breath as the listing came to a close.  Unfortunately, my good luck did not extend to the next phase of the process: the seller packed the wheel and distaff most carelessly, basically sticking the wheel in a box, cramming the distaff in diagonally, and sending her on her way with a stray sheet of bubble wrap floating on top and a single strip of tape sealing the box.

Damage to the standing distaff was obvious: the base had completely snapped off, but if it weren't for the added length of that piece, the wheel would undoubtably have been stuffed into a smaller box and sustained more damage.  As it was, my heart sank when I took the box from the postman and saw the holes punctured through the sides of the box by the top finials and the crank.

The crank was loose in the hub.  It required hide glue and four days of patience, but that repair did go smoothly.  More seriously, there was a torsional crack along one horizontal support which did not want to rotate back into place.  I ended up injecting diluted hide glue into the crack with a syringe, switching the tension screws so the one that was warped was in the undamaged hole, and hoping for the best.  The wood was parched but came back to life with some boiled linseed oil.

So, I learned a lot about repair from this wheel, and in the end I felt more affection for her because of the TLC she required from me.  She came back into spinning condition very nicely. My son named her Cricket.

I've only spun on one other bobbin-led wheel, and it was a wild jerky sort of ride, so I expected Cricket to be a tough spinning experience.  I do find it more difficult to get started, and joining breaks is harder to do securely, but in general I was surprised to find that the wheel is a pretty smooth spin and yields fine singles easily.  The flyer brake system was missing, so I rigged up something using a bit of felted old sweater under the flyer lip, some baker's twine, and a lovely antique clock key that I found on eBay.

She still has a ways to go before her restoration is "finished".  Her uprights are loose in the base, so there is significant wobble that needs addressing, and the treadle pin is bent downwards, which means the treadle slides right off without thick cotton cord belting it to the frame.  I have plans to add some feet to the four corners of the base, which will allow me to make some sort of block under the treadle to hold it in the right position.

A few weeks ago I brought Cricket to a spinning retreat, where she garnered a lot of attention.  I spun up a batt of sparkly dark green fiber and told her story over and over to curious spinners, some of whom had never seen an antique wheel in action!